OlyU Small USB-C Board
This board adds a USB-C port to your Removable Gate Controller if you have the USB Shell. Featuring 8 pads, 6 of these pads connect to the GameCube Controller's standard 6 connections for the main cable. The other 2 pads are for USB Data + and - The shape and alignment of these pads are designed so that installation is easy and does not require wires stretching across the board. This is compatible with PhobGCC and OEM Gamecube controllers with some modification. The USB data pins are specifically designed for the PhobGCC and PhoZL, so If you install one of these onto an OEM or a PHOB WITHOUT the USB Data, the only thing the OlyU will do is allow you to use USB-C to GCC Cables. If you are on a PhoZL / Phob and connect the data pins, you can flash your controller firmware from the USB-C port, use HOJA firmware, and much more!
This board adds a USB-C port to your Removable Gate Controller if you have the USB Shell. Featuring 8 pads, 6 of these pads connect to the GameCube Controller's standard 6 connections for the main cable. The other 2 pads are for USB Data + and - The shape and alignment of these pads are designed so that installation is easy and does not require wires stretching across the board. This is compatible with PhobGCC and OEM Gamecube controllers with some modification. The USB data pins are specifically designed for the PhobGCC and PhoZL, so If you install one of these onto an OEM or a PHOB WITHOUT the USB Data, the only thing the OlyU will do is allow you to use USB-C to GCC Cables. If you are on a PhoZL / Phob and connect the data pins, you can flash your controller firmware from the USB-C port, use HOJA firmware, and much more!
This board adds a USB-C port to your Removable Gate Controller if you have the USB Shell. Featuring 8 pads, 6 of these pads connect to the GameCube Controller's standard 6 connections for the main cable. The other 2 pads are for USB Data + and - The shape and alignment of these pads are designed so that installation is easy and does not require wires stretching across the board. This is compatible with PhobGCC and OEM Gamecube controllers with some modification. The USB data pins are specifically designed for the PhobGCC and PhoZL, so If you install one of these onto an OEM or a PHOB WITHOUT the USB Data, the only thing the OlyU will do is allow you to use USB-C to GCC Cables. If you are on a PhoZL / Phob and connect the data pins, you can flash your controller firmware from the USB-C port, use HOJA firmware, and much more!